Niveo Professional NGS18T16 Quick Installation Guide - Manual

NGS18T16
Fiber Gigabit Switch
16-Port Combo UTP/SFP
10/100/1000Mbps
+ 2 Gigabit SFP Open Slot
Web Management Switch
Quick Installation Guide
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates
and radiates radio frequency energy and, if
not installed and used in accordance with the
user’s manual, it may cause interference in
which case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
The Switch provides 16-port Combo
UTP/SFP 10/100/1000Mbps and can support
2 Gigabit SFP open slot to uplink. It is
designed for easy installation and high
performance in an environment where traffic
is on the network and the number of user
increased continuously. With the newest
Gigabit chip set, 19” Gigabit Ethernet switch
can fully support highest speed without
hanging on problem even when Full-Duplex
full loaded.
The rack-mount size is specifically designed
for medium to large workgroups. The Switch
can be installed where space is limited;
moreover
it provides smooth network
migration and easy upgrade to network
capacity. The 19” size can be rack-mount on
19” cabinet.
Key Features
 Complies with the IEEE802.3 Ethernet,
IEEE802.3u Fast Ethernet , IEEE 802.3ab/z
Gigabit Ethernet Standards, IEEE 802.3ad,
EEE 802.1x, IEEE 802.1Q, IEEE 802.1d,
IEEE 802.1w, IEEE 802.1p
…..
 18-Port Fiber Gigabit Switch : 16-Port
Combo UTP/SFP 10/100/1000M
Nway (Auto-negotiation) + 2 Gigabit SFP
Open Slot, Web Management Switch
 19” rack-mount size
 Auto-learn of networking configurations
 Auto-detect full/half-duplex modes for any
Port
 Dedicated full-duplex 2000Mbps bandwidth
 Store-and-Forward switching methods
 Embedded 500K Bytes packet buffer
 Provides 8K MAC address entry
 IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
 Non-blocking & Non-head-of-line blocking
full wire speed forwarding
 Auto-MDI/MDI-X function for any port
 Smart plug & play
Package Contents
Before you start to install this Switch, please
verify your package contains the following
items:
 18-port Fiber Gigabit Ethernet Switch
 Rack-mount Kit for Rack Installation
 One AC Power Cord
 One Quick Installation Guide
 CD (User Manual)
Note: If any of these items is missing or
damaged, please contact your local supplier for
replacement.
Front Panel (LEDs)
LED Indicators of 18 Ports Fiber Gigabit
Web Management Ethernet Switch
LED Status Description No. Of
LED
Power On Power on Power
1000M On Link UTP
(1~16)
Flashing Data activating
ACT On Link SFP
(1~16)
Flashing Data activating
Link/
ACT On Link UTP
(1~16)
SFP
(1~18)
Flashing Data activating