Northern Airborne Technology AA39 - Manual (Page 11)

AA39 Series Headset Adapter
SM43 Installation and Operation Manual
Section 2 Rev: 1.00 Issue 4 Page 2-4
ENG-FORM: 805-0115.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
2.6 Accessories Required But Not Supplied
2.6.1 Install Kit for AA39-075 and AA39-087
Installation kit p/n AA39-IKC (crimp) is required to complete the installation. The kit consists of the following:
AA39-IKC (NAT Part No. D09SL-IKC)
Quantity Description NAT Part #
1 D-min 9 Socket Housing 20-21-009
9 MS Crimp Socket 20-26-901
1* Jack Screw Set 20-27-002
1* Lock Clip set 20-27-004
1 9 Pin Connector Hood 20-29-009
* Use as required.
2.6.2 Install Kit for AA39-187 and AA39-287
Installation kit p/n AA35-IKC-1 (crimp) is required to complete the installation. The kit consists of the following:
AA35-IKC-1 (NAT Part No. D37SV-IKC)
Quantity Description NAT Part #
1 D-min 37 Socket Housing 20-21-037
37 MS Crimp Socket 20-26-901
1 37 Pin JVL Hood/Locklever 20-29-370
2.7 Installation Drawings
DRAWING REV. DESCRIPTION TYPE SERIAL NO.
AA39-075
AA39\075\403-0 - Mid Impedance Mic Interface Interconnect All
AA39\075\405-0 - Mid Impedance Mic Interface Connector Map All
AA39\075\922-0 1.00 Mid Impedance Mic Interface Mech. Installation All
AA39-087
AA39\087\403-0 - Low Impedance Mic Interface Interconnect All
AA39\087\405-0 - Low Impedance Mic Interface Connector Map All
AA39\087\922-0 1.00 Low Impedance Mic Interface Mech. Installation All
AA39-187
AA39\187\403-0 1.00 Dynamic Headset Adapter Interconnect All
AA39\187\405-0 1.00 Dynamic Headset Adapter Connector Map All
AA39\187\922-0 1.00 Dynamic Headset Adapter Mech. Installation All
AA39-287
AA39\287\403-0 1.00 Dual Dynamic Headset Adapter Interconnect All
AA39\287\405-0 1.00 Dual Dynamic Headset Adapter Connector Map All
AA39\287\922-0 1.00 Dual Dynamic Headset Adapter Mech. Installation All
Section 2 ends following the above documents