Turning on the nvr, First time power on, Normal power on – OpenEye EasyNVR User Manual
Page 24: Turning off the nvr
Advertising
24
First Time Power On
1.
Connect camera cables.
2.
Connect monitor cable.
3.
If remote access is necessary, connect network cable.
4.
Connect alarm inputs or relay output wires (if needed).
5.
Connect the power cable to the recorder and wait until the main screen is displayed on the
connected monitor; this process will take approximately 90 seconds.
Normal Power On
1.
Press the power button on the front or back panel.
The location of the power button depends on the model of your recorder.
1.
On the Hover menu, click
Exit
, and then click
Shutdown
.
2.
Confirm that you want to power off the recorder, and click
OK.
3.
After the screen turns blank, it is safe to unplug the power cable from the recorder.
Advertising