Royal Cozyfires LFX8Halo - Manual (Page 4)

4 LFX8H 010710
Lamp and Glass Bed Location
Ensure mains lead is switched off and/or disconnected.
Remove the five panel screws, place the lamp firmly into the lamp holder ensuring
that the pins on the lamp align with the location tabs on the lamp holder and rotate
clockwise until positively located
.
Slide glass bed into position with the frosted side down and re-fit front cover.
Arrange the decorative pebbles/glass pyramids on the glass bed.
Trim Location
Place each of the magnets onto the location brackets. If applicable remove the
protective film from the trim. Fit the trim ensuring positive location against magnets.
Some trim types may appear to be warped. This is caused by the spot welding
process and is normal; when fitted to the magnets the warp should not be visible.
Fire Operation
Power Switch Heater Switch
Press ( ) for power on. Press ( ) for 1kW.
Press ( o ) for power off Press ( ) for 2kW.
Central position; heater off (light only)
Always switch power off when not required to operate.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Some of the decorative pebbles/glass pyramids are small and could be a choking
hazard.
DO NOT place clothing or objects immediately in front of the unit. It may cause
overheating or cause objects to ignite.
Switch location
Heater Switch Power Switch
Front of unit