Scotsman MDT5N25 - Manual (Page 10)

OPERATION: Ice Vending
Dispensing takes place when the
Touch Free sensor’s infrared beam
bounces back to the sensor from a
container placed directly in front of
it.
If the container is in front of the
Touch Free sensor on the left side,
the ice dispensing vane will rotate
and sweep ice over the ice
dispensing chute. Ice will continue
to discharge out this chute as long
as the vane is turning. It stops
when the dispensing vane stops.
·
If the user does not remove the
container, ice will be dispensed
for 60 seconds and then stop.
If the container is in front of the
Touch Free sensor on the right
side, the inlet water valve will open
and water will flow into the
container.
·
If the user does not remove the
container water will be
dispensed for 90 seconds and
then stop.
MDT5N25 & MDT5N40 User Manual
November 2008
Page 9
ICE DISPENSING
VANE
BIN BOTTOM
DRIVE
MOTOR
ICE CHUTE
TOUCH FREE
SENSOR
SINK
The Touch Free System:
Hold or Place a Container in Front of The Touch Free
Sensor & Under The Ice or Water Spout;
Ice or Water Will Be Dispensed Without Touching The
Dispenser
Note: Clear glass containers may not reflect the sensor's
infrared beam and activate dispensing unless the user's
hand or fingers are at the back of the container.
TOUCH FREE
SENSOR