Scotsman SCV32 - Manual (Page 5)

Reversing Door Swing
Determine if the door swing needs to be reversed.
If it does, follow these instructions:
1. Open the door.
2. Remove the hinge pin from the top hinge (it
unscrews). Save the pin and the spacer.
3. Tilt the door out just enough to clear the hinge
and lift the door off the bottom pin.
4. Remove the upper hinge from the cabinet and
insert the pin removed in step 2. Be sure it is in
tight.
5. Mount the hinge to the bottom position on the
opposite side.
6. Move spacer from original lower hinge to new
lower hinge.
7. Remove the original lower hinge and move to
the top position, opposite side.
7. Remove the pin from the hinge.
8. Place door on bottom hinge pin. Align door with
hole in top hinge, add spacer from step 2
and insert pin. Tighten pin.
Accessory Kit
A kit is available to fill in the space to the
left and right when the SCV32 is installed in a
cabinet with an 18” wide space. The kit number is
KCE18B.
SCV32
June 2003
Page 4
Remove hinge
pin
Switch hinges top to bottom & left
to right when reversing swing
Tilt Out &
Lift Up