Backup light, rear turn signal light – Dodge 2008 Viper User Manual
Page 247
Advertising
![background image](/manuals/78649/247/background.png)
5. Push the replacement bulb into the socket assembly.
6. Reinstall the bulb and socket assembly into the upper
light assembly, and then turn it clockwise.
7. Install the access panel and the two fasteners.
8. Close the trunk.
Backup Light, Rear Turn Signal Light
1. Open the trunk.
2. Remove the two fasteners and then remove the access
panel.
246
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: