Seaward B433R - Manual (Page 9)

Gener al Gui dance Notes
9
MAI NT E NANCE
Clare Instruments Ltd. supplies a guarantee against defective material and faulty manufacture for a twelve month
period from the date of delivery.
Prior to despatch the equipment undergoes careful inspection and comprehensive testing. Report any defect
discovered with the equipment in respect of materials or workmanship within the guarantee period. We undertake
to put right the defect at our expense subject to our standard conditions of sale.
Our responsibility is in all cases limited to the cost of making good the defect in the equipment. This does not
apply to defects caused by abnormal conditions of working, accident, misuse, neglect or wear and tear.
In the event of difficulty or apparent malfunction, it is advisable to contact Clare Instruments Ltd. On –
Telephone 01903 233314 or Fax 01903 216089.
E-mail: info@clareinstruments .com Website: www.clareinstruments.com
We recommend that the complete instrument be returned to us for repair or re-calibration:
The Service Department
Clare Instruments Ltd
Dominion Way
WORTHING
West Sussex
BN14 8NW
Please take adequate care with packing and arrange insurance cover against transit damage or loss when
returning the instrument – if possible use the original packing box and supports.
Regularly calibrate all test equipment to meet internal quality or regulatory licensing authority requirements and to
keep the equipment in a safe working condition. Return the equipment to Clare Instruments for this purpose.
Keep the equipment in a clean condition. Examine all input and test output leads and connectors regularly to
guarantee they are in a safe working condition.
The equipment contains parts that are specific to the equipment only, therefore, order spare parts from the above
address. Clare Instruments Ltd strictly forbid any use of spare parts, other than those acquired from the original
manufacturer.
S U MMAR Y OF S AF E T Y I NF OR MAT I ON
Should there be any doubt about location, setting up procedure or operation of the test equipment, contact Clare
Instruments Ltd. Report any apparent malfunctions immediately.
Maintain the test equipment in accordance with Health and Safety at Work Act and the Electricity at Work
Regulations. The supply socket used for connection to the incoming mains system should undergo earth loop
impedance measurements in keeping with the regulations to guarantee safe operation.
NOTE
Your Health and Safety Inspector may, with the benefit of on-site observations, offer alternate or additional
instructions to the above recommendations.