Sierra Video TyLinx Pro User Manual
Page 100
TyLinx Pro Help
100
© 2012 Sierra Video Systems
and click on “Submit”..
Operational Notes
Enter the destination first. After the destination is entered, the button programmed
“Select/Shift” will flash indicating a valid entry. Press either “Select/Shift” to move the cursor to
the “Source” field, and enter the Source. After the “Source” is entered, pressing “Take” will
complete the route.
Names are stored in the router’s CPU. Enter names in the router before programming the
panel.
See the “names” section of the TyLinx Pro help file for details.
When a panel displays a question mark it is an indication that the name entered is not
recognized as a name in the router’s CPU.
The control panel downloads names from the router on power up. If the names in the router
are changed, remove power from the control panel for 10 seconds. Re-applying power will
cause the panel to download the new names.
Note:
The display area of the SCP-20 is limited to 6 characters. Names longer than than 6 characters will be