Sloan DV-32-AA Spray Arm - Manual

DV-32-AA I.I. — Rev. 1 (01/01)
Code No. 0816159
INSTALLATION INSTRUCTIONS
DV-32-AA BEDPAN WASHER
SPRAY ARM REPAIR KIT
F L U S H O M E T E R S
The information contained in this document is subject to change without notice.
SLOAN VALVE COMPANY • 10500 Seymour Avenue • Franklin Park, IL 60131
Phone: 800 9-VALVE-9 or 847-671-4300 • FAX: 800-447-8329 or 847-671-4380 • http://www.sloanvalve.com
© 2001 Sloan Valve Company Printed in U.S.A./Made in U.S.A.
INSTALLATION INSTRUCTIONS
1. Remove old Spray Arm by removing Set Screw from Diverter Body (use 3/32” Allen
Wrench). Discard old set screw.
2. Insert Flat Washer (DV-47) into Diverter Body.
3. Insert “O” Ring (DV-3) into Diverter Body.
4. Insert new Arm Assembly (DV-32-A) into Diverter Body.
5. Insert new Set Screw (DV-4) into Diverter Body and tighten securely.
NOTE: This DV-32-AA Spray Arm Repair Kit has been designed to
retrofit into any Sloan Diverter Assembly presently in the field.