Safety sign location super star, Introduction, Speed boss – Smithco Super Star 42-000-E Operator Manual 2010 User Manual

Page 7

Advertising
background image

5

Introduction

SAFETY SIGN LOCATION SUPER STAR

REMEMBER: If Safety Signs have been damaged, removed, become illegible or parts
replaced without decals, new decals must be applied. New decals are available from your
authorized distributor or factory.

25-352-P

By-pass V

alve

This valve should be completely closed

when running the unit. The valve is closed

by turning clockwise. This valve can be

opened to push the unit when the engine

is not running.

Towing the Machine

The machine can be moved for a short

dist
ance with the engine of

f, but we

do not

recommend this as a st

andard procedure. When

towing

do not

tow the machine faster than

2-3 MPH (3-5 km/h) because the drive system

may be damaged.

The tires may lock up if the

machine is towed too fast. If this occurs, stop

towing the machine. If the machine must be

moved a considerable dist

ance, transport it on

a truck or trailer

.

Speed Boss

by

Speed Boss allows the machine to

operate at a proper speed while

raking bunkers on golf courses.

This speed has been factory set at an

average speed of 3-4 MPH (5-6.5 kph).

It may be re-set to any desired

operating speed. See Manual for

instructions.

CAUTION

: When the rear rake

attachment is lowered while the

machine is in forward motion, the

forward speed of the machine will

slow drastically. Operator should be

prepared for rapid change in speed.

U.S. Patent # 5,725,068 25-337-P

Advertising
This manual is related to the following products: