Dynalink RTA230 - Manual (Page 57)

Chapter 4: Web Configuration
49
Management
Access Account
This page allows you to type in the password for accessing into your DSL Router.
For the Admin Account, the default setting
for user password is admin. If you want to
change the username and the password,
please retype the new password in the
Confirm field for confirmation. Then click
Apply.
For viewing configuration and statistics of
the router, please use User Account to
achieve your goal.
The default setting for user password is user.
Remote Access
There are four interfaces for the remote access. Please choose one of them if you want to enable the
remote access control.
Select this box to enable remote access:
Select this item to enable this function. Or
unselect this item to disable this function.
Web Browser:
Choose this box if you want to have remote
control through HTTP. The default port
number will be shown in the box. Modify
this number whenever you want.
Telnet:
Choose this box if you want to have remote
control through telnet.
SNMP:
Choose this box if you want to have remote
control through SNMP agent.
Ping:
Choose this box if you want to have remote
control through ping command under DOS
prompt.
Date and Time
The router’s clock must synchronize with global Internet’s time. The time you set in the screen will be
adapted to system log.