Dynex DX-55L150A11 - Manual (Page 18)

14
Adjusting the sound DX-55L150A11
Adjusting the sound
To adjust the sound:
1 Press MENU. The Main menu opens.
2 Press
or to highlight Audio, then press ENTER or . The
Audio menu opens.
3 Press or to highlight an option, then press or to adjust
the option. You can select:
• Balance—Adjusts the balance between the left and right
audio channels.
• Surround Sound —Turns the surround sound effect on or
off.
• Equalizer—Lets you select the frequency you want to
adjust and change its value.
• SPDIF Type—Lets you select the preferred audio format for
SPDIF audio signals. SPDIF is only available on digital
channels or when using an HDMI device. Choose from PCM,
RAW, or Off.
Note: By selecting SPDIF Type, you can choose the digital audio output
type.
• Auto Volume Control—Lets you turn automatic volume
control on or off. When this option is turned on, it keeps the
audio in a preset range to eliminate large spikes in volume.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Selecting the audio mode
To select the audio mode:
• Press AUDIO on the remote control one or more times to cycle
through the available sound modes. Options include Standard,
Speech, User, and Music.
Changing channel settings
To change the channel settings:
1 Press MENU. The Main menu opens.
2 Press or to highlight TV, then press ENTER or . The TV
menu opens.
3 Press or to highlight an option, then press or to adjust
the option. You can select:
• Tuner Mode –Lets you select Antenna or Cable.
• Channel Scan–Lets you scan for channels that have signals
and stores the channels information in memory. When you
press CH
or CH , your TV skips any channels that do
not have a signal.
• Channel Skip–Lets you delete a channel stored in memory.
When you press CH or CH , your TV skips the channel
you deleted. You can still tune to the channel using the
number buttons on the remote control.
• MTS/SAP–Lets you select the sound mode. You can select
Mono, Stereo, or SAP (second audio program).
• Audio Language –Lets you select the audio language for a
program (if other languages are available).
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Setting parental controls
Parental controls let you prevent your children from watching
inappropriate material on TV. When set, parental controls read the
rating of the program (with some exceptions, such as news and sports)
and deny access to programs that exceed the ratings level you select. To
watch programs that exceed the selected rating, you must enter a
password.
To set parental controls:
1 Press MENU. The Main menu opens.
2 Press or to highlight Parental, then press ENTER or . The
Parental menu opens.
MTS/SAP
DX-55L150A11_10-1135_MAN_ENG_V1.book Page 14 Monday, October 25, 2010 12:02 PM