Directed Electronics TD850 - Manual (Page 44)

AUDIO SETUP
AU DIO S E TUP
EX IT SE T UP
AU DIO O UT
S P DIF /R AW
S P DIF /P CM
SPDIF/OFF
Highlight the AUDIO OUT option, and press LEFT/RIGHT/UP/DOWN to choose
the audio output mode you prefer. Press ENTER to confirm:
There are 3 optional audio output modes: SPDIF/OFF, SPDIF / RAW and SPDIF/
PCM.
SPDIF/OFF: Choose this setting to output analog signal, and there will be no signal
outputted from optical jack.
SPDIF/ RAW: Choose this setting if your DVD player is connected to a power
amplifier with an optical cable. When playing a disc recorded with Dolby Digital,
DTS and MPEG audio formats, the corresponding digital signals will be
outputted from the Optical Output jack.
SPDIF / PCM: Choose this setting if your DVD player is connected to a 2-
channel digital stereo amplifier. When playing a disc recorded with Dolby Digital
and MPEG audio formats, audio signals will be modulated into a 2-channel PCM
signal, and it will be outputted from the Optical Output jack .
AUDIO OUT
41
-EN
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn