Extron Electronics IPL T SF Series - Manual (Page 41)

IPL T SF Series Interfaces • Software Setup 3-21
8 . Click Apply Email/Contacts.
The new e-mail and recipient are now displayed in the left pane.
9
. Use the Contact Manager button to create new contacts (if
desired).
10. Use the Email Manager button to create new custom
e-mails (if desired).
11. Click Done.
Step twelve: set monitored conditions
The Monitor tab is used to respond with an action or e-mail to
a specified condition or event.
Actions vary by selected device, and include options such as
Enable/Disable PINs, Lockout Front Panel, and Time Delay.
Custom e-mails can be created and sent to specified e-mail
addresses following specified conditions or events.