Epson POWERLITE CINEMA 200 - Manual (Page 23)

23
Choosing the Aspect Ratio
Composite and S-video signals are sized automatically to fit on your screen when Auto is
selected as the Aspect setting. If you’re viewing a component video signal, you may need to
change the size of the image (or aspect ratio) by pressing the
Aspect button on the remote
control.
■ If your video source is connected to the projector’s Video or S-Video port, select Auto to
automatically display your image in the correct size.
■ If the Auto option is unavailable (when the source is connected to the Input A or B port),
you’ll most likely want to choose one of these settings:
Normal for standard TV broadcasts, computer images, or images having a 4:3 aspect
ratio.
Zoom for images recorded in 16:9 (wide-screen) format.
On occasion, you may wish to select one of these options:
■ Squeeze for DVDs or video recordings made in a compressed (or anamorphic) 16:9
format, sometimes called “Squeeze Mode.”
■ Through if your image is smaller than 1280 × 720 pixels and you want to display it at its
original pixel size without resizing it to fit on the screen.
■ Squeeze Through if your image is recorded in Squeeze Mode, is smaller than
1280 × 720 pixels, and you want to display it at its original pixel size.
Note: If you display a 4:3 image using the Zoom setting, the edges of the image will be cut off. You
can use the Zoom Caption option to resize and reposition the image to your liking (see page 35).
For details on how the projector resizes the picture size when you choose an Aspect setting, see
page 66.
4:3 image using Normal setting 16:9 image using Zoom setting