Alinco DJ-A446 - Manual (Page 18)

Professional
FM Transceiver
4
BATTERY INFORMATION
How to Charge the battery pack
1.Plug the AC adaptor into the AC outlet, then plug into
the DC jack, the indicator lights orange for 1 second and
goes out---waits to charge.
2.Slide the battery or transceiver with battery into the
charger; make sure the battery terminals are in contact
with the charging terminals. LED turns into twinkling RED
---pre-charging begins.
3.Pre-charging for about 5 minutes, LED stop blinking then
charging begins.
4.It takes up to 4 hours to fully charge the battery, and LED
turns to green when the charge is complete.
Warning: Never charge while the radio is turned on. When turned on, the charger can't detect the
charging voltage properly and LED fails to indicate charge status correctly.
5. LED Indicator:
STATUS self-examine
when power on (No battery) Pre-charging
Charge
normally
Fully
Charged Trouble
LED
Orange
(for 1 second) None
Red blinks
for 5 minutes
Red Green
Red blinks
alternatively