Eneo PLS-5304 - Manual (Page 32)

Part 4 - Appendix
32
Troubleshooting
Problem Check
Power LED will not turn on
• Check the LAN cable.
• Check that the power cable is connected or the NVR has power.
The system is unable to recognize
network interface
• Check the LAN cable.
• Check the network LED.
Specifications
Model PLS-5304 PLS-5308
Video
Input 4 BNC 8 BNC
Compression H.264
Resolution
720x576(960x576), 640x360, 360x288 (PAL)
720x480(960x480), 640x360, 360x240 (NTSC)
Bitrate Control VBR
Frame Rate
120ips @ 720x480(960x480)
(Quadruple Stream) 240ips @ 720x480(960x480)
(Quadruple Stream)
Inputs/
Outputs
Audio Input 4 RCA
RS485 1 Port
Ethernet 10M/100M/1Gbps
DC12V Input Terminal Blocks
LED Power(Status), Network
Button/Switch Reset
Environmental
Conditions
Operating Temperature 0°C ~ 40°C
Operating Humidity 0% ~ 90%
General
Dimensions (W x H x D) 200mm x 44mm x 145mm
Shipping Dimensions
(W x H x D)
258mm x 103mm x 188mm
Unit Weight 0.84kg
Shipping Weight 1.22kg
Power Supply DC12V or PoE (IEEE802.3af class3)
Power Consumption Max. 12W
Approval FCC, CE
These product specifications may change without prior notice.