H3C Technologies H3C SR6600-X - Manual (Page 132)

122
Figure 111 FIP-600 status LED
Table 43 FIP-110/FIP-210/FIP-240/FIP-600 LED description
LED Status Description
(yellow/green)
Status LEDs of
GE 0 to GE 1
Off No link is present.
Steady green A 1000 Mbps link is present.
Flashing green
Data is being received or transmitted at a rate of
1000 Mbps.
Steady yellow A 10/100 Mbps link is present.
Flashing yellow
Data is being received or transmitted at a rate of
10/100 Mbps.
(green)
RUN
Off No power input is available or the FIP has failed.
Slow flashing (1
Hz)
The FIP is operating correctly.
Fast flashing (8
Hz)
Application software is being loaded.
CAUTION:
To avoid the hardware damage, do not power off the
router, or insert or remove the FIP.
(yellow/green)
Status LEDs of
SFP 0 to SFP 1
Off No link is present.
Steady green A link is present.
Flashing green
Data is being sent or received at a rate of 1000
Mbps.
Steady yellow
The transceiver module failed the self-test of the
router.