Envision Peripherals EN9250 - Manual (Page 16)

EN9250
15
OPERATING INSTRUCTIONS (cont)
•
Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu) or go back to the previous menu.
2. When OSD menu is in off status, press this button for 2 seconds to
activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock
and Focus.
•
Power Indicator:
Green — Power On mode.
Orange — Off mode.
•
Osd-Lock Function:
To lock the OSD, press and hold the MENU button while the monitor is off
and then press power button to turn the monitor on.
To un-lock the OSD - press and hold the MENU
button while the monitor
is off and then press power button to turn the monitor on.