Epson A794-D100 - Manual (Page 84)

Chapter 6: Programming Information A794 Owner’s Guide
March 1999 78
Select Superscript or Subscript Modes
Turns superscript or subscript modes on or off. This attribute may be combined with
other characters size settings commands (12, 13, 1B 21 n, 1D 21 n,…)
ASCII AX ENQ n
Hexadecimal 1F 05 n
Decimal 31 05 n
Value of n 0 = Normal character size
1 = Select subscript size
2 = Select superscript size
Default 0 (normal size)
Exceptions
This command is ignored if n is out of the specified range.
Summary of Rotated Printing
The table shows the combinations of upside-down print, 90 degree clockwise rotated
print, and 90 degree counterclockwise rotated print.
90 degree clockwise rotated and 90 degree counterclockwise rotated print commands
are mutually exclusive: The setting of the last received command is effective .
The samples of the print show only the normal size characters. Double-wide and
double-high characters are printed in the same orientation. They may also be mixed on
the same line.
Upside Down
1B 7B n Rotated CW
1B 56 n Rotated CCW
1B 12 Resulting Output
Canceled Canceled Canceled 1 (See Below)
Canceled Set Canceled 2 (See Below)
Set Canceled Canceled 3 (See Below)
Set Set Canceled 4 (See Below)
Canceled Canceled Set 5 (See Below)
Set Canceled Set 6 (See Below)
Note: Right-side up and upside down print modes cannot be mixed on the same line.