Grass Valley 1200 Operation Manual - Manual (Page 166)

4-4
Section 4— Basic Operations
Figure 4-2. Background Mix Transition
Background Wipe
A wipe (Figure 4-3) uses a moving pattern to transition from one
picture to another. To wipe between Program and Preset bus
sources, do the following:
1. Select a PST bus [crosspoint] .
2. Select the [Bkgd] Transition button. The Preset scene will
appear on the preview monitor (if present).
3. Select the [Wipe] Transition button.
4. Select a [pattern] button in the Pattern section. If you want to
select a menu pattern, press the [Menu] button in the Pattern
section and select a pattern from the display menu.
5. Select the [Wipe] button in the pattern section and adjust
pattern modifiers as desired:
Wipe Direction – Select the desired direction: [Normal] ,
[Reverse] , or [Flip Flop] .
Edge Width – Select [Border] and adjust (Width).
Edge Softness – Select [Soft] and adjust (Softness).
Edge Color – Select Matte [Wipe Border] and adjust
the Matte (Lum) , (Sat) , (Hue) , and
(Opacity) controls.
Position – Turn on the [Pos] button and move the
joystick to move the pattern, if desired.
To return the pattern to center, press
[Center] .
Aspect, Rotation, – Select the Pattern [Menu] button or the
Modulation, display [Wipe] button to bring up the
Multiplication wipe menus. Adjust menus as desired.