Polaris 2009 Victory Victory Vision - Manual (Page 62)

59
INSTRUMENTS, FEATURES, & CONTROLS
Contr
ols
Check Engine & Turn Signal Indicator Lamps
Check
Engine
This indicator illuminates momentarily when the ignition switch is ON and
the engine is stopped. The light will illuminate if the tilt sensor has shut
down the engine. If systems report abnormal sensor or engine operation
(with ignition key ON), the indicator illuminates as long as the fault
condition exists. An error code menu can be viewed in the information
display. Use the MODE button to toggle until "Err" is displayed and record
the information shown. See an authorized VICTORY dealer for code
details. NOTE: Codes are not stored. The "Err" screen displays only when
the check engine light is on, or goes on and off during one ignition cycle.
When the key is turned OFF, the code and message is lost, but will
reappear if the fault reoccurs after restarting the engine. NOTICE: If the
Check Engine Indicator illuminates while the engine is running, see an
authorized VICTORY dealer promptly for diagnosis.
Turn
Signal
This indicator flashes the left or right arrow, or both (hazard) when turn or
hazard is activated. If a turn signal bulb has failed, or if there is a short
circuit in the turn signal system, the turn signal indicator flashes at more
than twice the normal rate.
(L) (R)
visionownersmanual.book Page 59 Wednesday, February 13, 2008 4:31 PM