Polaris 2006 Edge Snowmobiles with 121 Track - Manual (Page 111)

108
MAINTENANCE
General Maintenance
Taillight/Brakelight Replacement
To replace a bulb on most EDGE models, remove the taillight lens
screws and remove the lens to access the bulbs.
On models with the adjustable seat bucket:
1. Remove the two sets of
fasteners at the rear corners
of the seat base.
2. Tilt the rear of the seat
upward to access the bulbs
from under the seat.
3. Twist the bulb socket
slightly and pull it from
the assembly.
4. Replace the bulb and reinstall the socket into the assembly.
5. Lower the seat and reinstall the fasteners.
6. Test the taillight and brakelights for proper operation.