Polaris 2011 Widetrak IQ - Manual (Page 99)

95
MAINTENANCE
Lubrication
Driveshaft Bearing
Using a needle-nose grease
gun, inject grease into the
grease hole on the top edge
of the bearing flangette
until grease purges from the
seal on the inside of the tun-
nel. This should take
approximately two pumps
each. Do not use more than
four pumps.
Throttle Cable
Lubricate the throttle cable
lightly with grease or oil. With
the engine off, turn the han-
dlebars to the left and lubri-
cate liberally as shown.
Front Suspension
The front suspension and steering components do not require lubrica-
tion.
Coupler Lubrication
Grease the driveshaft coupler
only. The jackshaft on this
model is a one-piece jackshaft
that requires no lubrication.
Grease Hole
+
Driveshaft
T
ran
sm
iss
ion