Polaris 2014 Ranger EV - Manual (Page 26)

24
FEATURES AND CONTROLS
Console
Drive Mode Switch
CAUTION! Changing the drive mode switch position while driving
could result in an automatic increase or decrease in speed without a
change to accelerator pedal pressure.
Press the top of the switch to select high mode. Use high
mode for most trail-riding conditions. The vehicle will
operate at speeds up to 25 MPH (40 km/h).
Press the bottom of the switch to select low mode. Low mode
is recommended for short-term operation in extreme load
conditions. Use low mode when towing, hauling loads or
maneuvering over obstacles. Speed will be limited to a maximum of 10 MPH (16 km/h) and
regenerative braking increases to improve control in aggressive terrain. Return the mode
switch to high mode for normal operation.
Move the switch to the center position to select the maximum range mode. Use this mode to
operate the vehicle a greater distance or for a longer time period. This mode limits both
speed and torque to obtain the maximum driving range.
Mode Maximum
Speed
Torque
(percent of
maximum
torque)
Deceleration
(regenerative
braking)
Application
High 25 MPH
(40 km/h)
70% Minimum Trail riding
Max
Range
15 MPH
(24 km/h)
50% Minimum Whenever possible, to maximum driv-
ing range of battery pack
Low 10 MPH
(16 km/h)
100% Maximum Towing, hauling loads, driving on steep
hills or aggressive terrain
High
Low
Maximum
Range