iHealth Wireless Smart-Gluco Monitoring System - Manual (Page 2)

These contents may vary according to geographic markets.
Please refer to the package contents listed on the package you
purchased.
FIRST TIME SETUP INSTRUCTIONS
· Download the companion app
Prior to first use, download and install the free iHealth
Gluco-Smart App from the App Store to your iOS device. Follow
the on-screen instructions to create your iHealth ID.
· Access iHealth Cloud
You can use your iHealth ID to gain access to free and secure
Cloud Services. Go to www.ihealthlabs.com and click on “Sign In”.
· Charge the battery
Out of the box
Your meter is powered by a built-in, rechargeable battery. Plug
one end of the charging cable into the side of the meter and
the other end into your computer’s USB port. Charge it for two
to four hours before first use. A fully charged battery can
typically take up to 200 tests depending on your daily usage.
After you have used your meter for some time, appears
for 2 seconds when the battery in your meter is low on power.
You must recharge the battery before using it again. After 2
seconds, the meter shuts off automatically. The meter does not
take any measurement when the battery is low.
Important: If battery is completely drained, fully charge the
Low battery message