Bang & Olufsen BeoVision 5 - Manual (Page 28)

28
Register equipment connected to BeoVision 5
When you connect additional video
sources or equipment to your
BeoVision 5, you must register the
equipment in an on-screen menu.
This enables you to operate the
equipment with your Beo4 remote
control.
Find the type of specific video
equipment you have connected in
the EXTERNAL SOURCES menu. If the
specific equipment is not available,
then choose one of the generic
options that matches the type of
equipment you have connected.
For information about where and
how to connect the equipment,
please refer to Connection panels on
BeoVision 5 on page 25.
Register additional equipment
Find the name of your VCR (V.TAPE), DVD
player, Satellite receiver, or set-top box in the
EXTERNAL SOURCES menu, or register it as a
generic device type.
The second choice means, however, that while
it is possible to select this type of audio/video
equipment with Beo4, you can not operate its
functions with Beo4.
EXTERNAL SOURCES
V.TAPE Panasonic ...
DVD Panasonic ...
V.AUX NONE
SAT Hughes ...
STB Generic RGB
store
Options on the EXTERNAL SOURCES menu
V.TAPE… Choose your particular VCR, or select:
GENERIC NTSC… For an unspecified NTSC VCR.
NONE… If no VCR is connected.
DVD… Choose your particular DVD player, or
select:
GENERIC NTSC… For an unspecified NTSC DVD
player.
NONE… If no DVD player is connected.
V.AUX… Choose your equipment type, or select:
GENERIC NTSC… For unspecified audio/video
equipment. You can connect a Satellite receiver
or set-top box to V.AUX. If this is the case, use
V.AUX* to select this input. On the other hand,
if this input is used for a cable box set up for
V.AUX INPUT in the RF SETUP menu, then select
the cable box via the TV button on Beo4.
PC… If a PC is connected.
NONE… If no equipment is connected.
SAT… Choose your Satellite receiver, or select:
GENERIC NSTC/HDTV… For an unspecified NTSC
or HDTV receiver.
NONE… If no Satellite receiver is connected.
STB… Choose your particular set-top box, or
select:
GENERIC NTSC/YPbPr/RGB… For an unspecified
NTSC, YPbPr, or RGB set-top box.
NONE… If no set-top box is connected.
While BeoVision 5 is on…
> Press MENU on Beo4 to call up the main
TV SETUP menu.
> Press 6 to call up the EXTERNAL SOURCES menu
(7 if your BeoVision 5 is equipped with a
motorised stand).
> Use ▼ ▲ to step to the menu option you want.
> Press ss tt to view your choices for each menu
option.
> Press GO to store.
Once you have completed menu operations…
> Press EXIT or a source button, such as TV or
SAT, to leave all menus, or press STOP to back
up through previous menus.
The audio/video equipment which is available on
the menu for additional sources is listed in the
Product List, which is available from your Bang &
Olufsen retailer.
*NOTE! In order to display the extra LIST ‘button’,
V.AUX, on Beo4, you must add this extra ‘button’
to the Beo4 LIST function. Please refer to Beo4’s
own Guide on the CD-rom for further instruction.