Epson 900N - Manual (Page 48)

41
4. Click the TCP/IP tab to display the TCP/IP menu.
5. For The way of acquiring an IP address , select one of the following: Manual ,
RARP , BOOTP , or DHCP .
To use RARP, BOOTP, or DHCP, a server for each protocol is
necessary. If there is no corresponding server, do not use any
of these settings. See your network operating system
documentation for the settings.
6. Assign the IP address, the Subnet mask, and the Default gateway. If you use
DHCP to acquire an IP address, you can’t assign these items; they are assigned by
the server.
If you will use the card’s internal home page, assign an IP
address manually.
The default IP address is 11.22.33.44. If you plan to use the
card’s internal home page, change the default IP address.
If a server or router acts as a gateway, type the gateway
address. If there is no gateway, type the IP address of your
computer.
instconf.fm Page 41 Friday, February 19, 1999 4:00 PM