General safety advice for electrical power tools, Electrical safety, Personal safety – Parkside PAS 3.6 A1 User Manual
Page 8: Careful handling and use of electrical power tools
![background image](/files/823070/content/doc008.png)
8 GB
General safety advice for electrical power tools
2.
Electrical safety
a)
The mains plug on the device must match
the mains socket. The plug must not
be modified in any way. Do not use
an adapter plug with devices fitted
with a protective earth. Unmodified
plugs and matching sockets reduce the risk of
electric shock.
b)
Avoid touching earthed surfaces such
as pipes, radiators, ovens and refrig-
erators with any part of your body.
There is an increased risk of electric shock if
your body is earthed.
c)
Keep the device away from rain or
moisture. Water entering an electrical device
increases the risk of electric shock.
d)
Do not use the mains lead for
any purpose for which it was
not intended, e.g. to carry the
device, to hang up the device or to pull
the mains plug out of the mains socket.
Keep the mains lead away from heat,
oil, sharp edges or moving parts of the
device. Damaged or tangled mains leads
increase the risk of electric shock.
e)
When working outdoors with an
electrical power tool always use ex-
tension cables that are also approved
for use outdoors. The use of an extension
cable suitable for outdoor use reduces the risk
of electric shock.
f)
use a residual current device (RCD)
for protection if operating the electri-
cal power tool in a moist environment
is unavoidable. The use of an RCD reduces
the risk of electric shock.
3. Personal safety
a)
Remain alert at all times, watch what
you are doing and always proceed
with caution. Do not use the device if
you are tired or under the influence of
drugs, alcohol or medication. One moment
of carelessness when using the device can lead
to serious injury.
b)
Wear personal protective
equipment and always wear
safety glasses. The wearing of
personal protective equipment such as dust
masks, non-slip safety shoes, safety helmets or
ear protectors, appropriate to the type of elec-
trical power tool used and work undertaken,
reduces the risk of injury.
c)
Avoid unintentional operation of the
device. Check that the electrical power
tool is switched off before you connect
it to the mains, pick it up or carry it.
Accidents can happen if you carry the device
with your finger on the ON / OFF switch or with
the device switched on.
d)
Remove any setting tools or spanners
before you switch the device on. A tool
or spanner left attached to a rotating part of a
device can lead to injury.
e)
Avoid placing your body in an unnat-
ural position. Keep proper footing
and balance at all times. By doing this
you will be in a better position to control the
device in unforeseen circumstances.
f)
Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep your
hair, clothing and gloves clear of mov-
ing parts. Loose clothing, jewellery or long
hair can become trapped in moving parts.
g)
If vacuum dust extraction and collection
devices are fitted do not forget to check
that they are properly connected and
correctly used. The use of these devices
reduces the hazard presented by dust.
4.
Careful handling and use
of electrical power tools
a)
Do not overload the device. Always
use an electrical power tool that is
intended for the task you are under-
taking. By using the right electrical power
tool for the job you will work more safely and
achieve a better result.
b)
Do not use an electrical power tool if
its switch is defective. An electrical power
66446_par_Akkuschrauber PAS 3.6 A1_content_LB4.indd 8
25.05.11 12:17
- X3
- PHP 500 A1
- PHP 500 A1
- PWS 125 A1
- PWS 125 A1
- PWS 230 A1
- PWS 125 A1
- PWS 125 A1
- PWS 125 A1
- PWS 230 A1
- PWS 125 A1
- PWS 125 A1
- PWS 125 A1
- PWS 125 A1
- PWS 230 A1
- PWS 125 A1
- PWS 125 A1
- PWS 125 A1
- PWS 125 A1
- PWS 230 A1
- PWS 125 A1
- PWS 125 A1
- PWS 125 A1
- PWS 125 A1
- PWS 230 A1
- PWS 125 A1
- PWS 230 A1
- PWS 125 A1
- PWS 125 A1
- PWS 230 A1
- PWS 125 A1
- PWS 125 A1
- PWS 125 A1
- PABS10.8-LI
- PLS 30
- PHLG 2000 B1
- PHLG600
- PHLG 2000-2
- PHLG 2000 B1
- PHLG 2000-2
- PHLG 2000 B1
- PHLG 2000-2
- PHLG 2000-2
- PHLG600
- PABS 18 A1
- PABS 18 A1
- PFSP 100
- PFSPS150
- PABS 10.8 A1
- PABS 10.8 A1
- PDS 200 A
- PAS 3.6 A1
- PAS 3.6 A1
- PAS 3.6 A1
- PAS 3.6 A1
- PAS 3.6 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PET 25 A1
- PET 25 A1
- PET 25 A1
- PET 25 A1
- PET 25 A1
- PET 25 A1
- PET 25 A1
- PET 25 A1
- PDS 200A
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PLBS 30 A1
- PGG 15 A1
- PGG 15 A1
- PGG 15 A1
- PGG 15 A1
- PGG 15 A1
- PGG 15 A1
- PGG 15 A1
- PGG 15 A1
- PGG 15 A1
- PGG 15 A1
- PGG 15 A1
- PGG 15 A1
- PMGS 12 A1
- PMGS 12 A1
- PWS 230 A1
- PWS 230 A1
- PWS 230 A1
- PWS 230 A1
- PWS 230 A1
- PWS 230 A1
- PWS 230 A1
- PWS 230 A1
- PWS 230 A1
- PWS 230 A1
- PWS 230 A1
- PSBM 850
- PSBM 850
- PLBS 30
- PHKP 500SE
- PHLG 2000 B1
- PHLG 2000 B1
- PHLG 2000 B1
- PHLG 2000 B1
- PHLG 2000 B1
- PHLG 2000 B1
- PHLG 2000 B1
- PHLG 2000 B1
- PHLG 2000 B1
- PHLG 2000 B1
- PHLG 2000 B1
- PFS 100 B2
- PFS 100 B2
- PFS 100 B2
- PFS 100 B2
- PFS 100 C3
- PFS 100 B2
- PFS 100 C3
- PFS 100 B2
- PLP 100 A1
- PLP 100 A1
- PLP 100 A1
- PLP 100 A1
- PLP 100 A1
- PLP 100 A1
- PLP 100 A1
- PABS 10.8 C2
- PABS 12 A1
- PABS 10.8 C2
- PABS 18-Li B2
- PABS 18-Li B2
- PABS 10.8 C2
- PABS 10.8 C2
- PABS 18-Li B2
- PABS 10.8 C2
- PABS 10.8 C2
- PABS 18-Li B2
- PABS 10.8 C2
- PABS 10.8 C2
- PABS 18-Li B2
- PABS 10.8 C2
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PFBS 9.6 A1
- PDT 40 A1
- PDT 40 A1
- PDT 40 A1
- PDT 40 A1
- PSBS 24 A1
- PSBS 24 A1
- PASS 3.6 A1
- PASS 3.6 A1
- PABSW 10.8 A1
- PASS 3.6 A1
- PASS 3.6 A1
- PASS 3.6 A1
- PABH 18 LI A1
- PABSS 3,6 Li
- PABSW 10.8 A1
- PABSS 3,6 Li
- PASS 3.6 A1
- PASS 3.6 A1
- PASS 3.6 A1
- Z30825
- Z30825
- Z30825
- Z30825
- Z30825
- Z30825
- Z30825
- PABSS 3,6 Li
- PABSS 3,6 Li
- PDSP 1000 A1
- PDSP 1000 A1
- PDSP 1000 A1
- PDSP 1000 A1
- PDSP 1000 A1
- PDSP 1000 A1
- PDSP 1000 A1
- PDSP 1000 A1
- PDSP 1000 A1
- PDSP 1000 A1
- PDSP 1000 A1
- PDFP 500 A1
- PDFP 500 B2
- PDFP 500 B2
- PDFP 500 A1
- PDFP 500 B2
- PDFP 500 A1
- PDFP 500 A1
- PDFP 500 A1
- PDFP 500 B2
- PDFP 500 A1
- PDSS A1
- PDSS A1
- PDSS A1
- PDSS A1
- PDSS A1
- PDSS A1
- PDSS A1
- PDSS A1
- PDSS A1
- PDSS A1
- PDSS A1
- PDSS A1
- PDSS A1
- PBZS 20 A1
- PBZS 20 A1
- PBZS 20 A1
- PBZS 20 A1
- PBZS 20 A1
- PBZS 20 A1
- PBZS 20 A1
- PBZS 20 A1
- PBZS 20 A1
- PBZS 20 A1
- PP 18 A1
- PP 18 A1
- PP 18 A1
- PP 18 A1
- PP 18 A1
- BLK 520
- BLK 520
- BLK 520
- PDT 40 B2
- PDT 40 B2
- PDT 40 B2
- PDSS 310 A1
- AIR RATCHET SET PDRS
- PDSS 310 A1
- PDSS 310 A1
- AIR RATCHET SET PDRS
- PDMH 4500 A2
- PDMH 4500 A2
- PDMH 4500 A2
- PDMH 4500 A2
- PDMH 4500 A2
- PDMH 4500 A2
- PDMH 4500 A2
- PDMH 4500 A2
- PDMH 4500 A2
- PDMH 4500 A2
- PABS 10.8 A2
- PABS 10.8 A2
- PABS 10.8 B2
- PABS 10.8 B2
- PABS 10.8 A2
- PABS 10.8 C2
- PABS 10.8 C2
- PABS 10.8 C2
- PABS 10.8 C2
- PDR A1
- PDR A1
- PDR A1
- PDR A1
- PAS 3.6 B1
- PAS 3.6 B1
- PAS 3.6 B1
- PABS 18-Li B4
- PABS 18-Li B3
- PABS 18-Li B4
- PABS 18-Li B4
- PDT 40 C2
- PDT 40 C2
- PDT 40 C2
- PDT 40 C2
- PDT 40 C2
- PDT 40 C2
- PAS 7.2 A1
- PAS 7.2 A1
- PAS 7.2 A1
- PAS 7.2 A1
- PAS 7.2 A1
- PABH 18 LI A1
- PABH 18 LI A1
- PABSW 10.8 A1
- PABSW 10.8 A1
- PABSW 10.8 A1
- PWSZ 125 C3
- PWSZ 125 C3
- PWSZ 125 C3
- PWSZ 125 C3
- PWSZ 125 C3
- PWSZ 125 C3
- PWSZ 125 C3
- PLEM 50 A1
- PLEM 50 A1
- PABS 14.4 A1
- PABS 14.4 A1
- PABS 14.4 A1
- PABS 14.4 A1
- PABS 14.4 A1
- PABS 14.4 A1
- PABS 14.4 A1
- PABS 14.4 A1
- PABSW 10.8 B2
- PABSW 10.8 B3
- PABSW 10.8 B2
- PABSW 10.8 B3
- PABSW 10.8 B3
- PAWS 3.6 A1
- PAWS 3.6 A1
- PABS 18-Li B4
- PDR A1
- PDNE 4000 A1
- PDMS A1
- PDFP 500 B2
- PDFP 500 B2
- PDBS 6.2 A1
- PDBS 6.2 A1
- PDBS 6.2 A1
- PDSP 1000 B2
- PDSP 1000 B2
- PDSP 1000 B2
- AIR RATCHET SET PDRS
- AIR RATCHET SET PDRS
- AIR RATCHET SET PDRS
- AIR RATCHET SET PDRS
- PFS 100 C3
- PFS 100 C3
- PFS 100 C3
- PASS 3.6 B2
- PASS 3.6 B2
- PASS 3.6 B2
- PAMFW 10.8 A1
- PAMFW 10.8 A1
- PAMFW 10.8 A1
- PAMFW 10.8 A1
- PAMFW 10.8 A1
- PAMFW 10.8 A1
- PABSW 10.8 B3
- PABSW 10.8 B3
- PSDB 6.0 A1
- PSDB 6.0 A1
- PSDB 6.0 A1
- PSDB 6.0 A1
- PSSA 3.6 C3
- PABSW 10.8 B3
- PABSW 10.8 B3
- PSDB 6.0 A1
- PT360
- PSBSA 18-Li A1
- PSBSA 18-Li A1