Casio PX-860 - Manual (Page 24)

English
Recording and Playback
EN-23
Deleting Recorded Data
The following procedure deletes a specific track of a
song.
IMPORTANT!
• The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in Digital Piano memory before you
perform the following steps.
1.
Press the SONG RECORDER button twice
so its lamp is flashing.
2.
While holding down the FUNCTION button,
press the SONG RECORDER (L/R) button to
select the track you want to delete.
3.
Press the SONG RECORDER button until its
lamp is lit.
• This will cause the lamp of the track you selected in
step 2 of this procedure to flash.
Example: If you selected Track 2 for deletion
4.
Once again, hold down the FUNCTION
button as you press the SONG RECORDER
button.
• This deletes the selected track and enters playback
standby.
• To cancel the delete operation at any time, press the
SONG RECORDER button twice so its lamp is unlit.
NOTE
• Only the Digital Piano’s SONG RECORDER (L/R)
button are operational from step 3 until you actually
perform the delete operation in step 4. No other
button operation can be performed.
Anything played on the Digital Piano is recorded to the
USB flash drive as audio data (WAV files
*). If you play
along on the Digital Piano as you play back data stored
in song memory, the memory playback and your
keyboard play are both recorded to USB flash drive.
* Linear PCM, 16bit, 44.1 kHz, Stereo
Recording Capacity
• 99 files (No. 01 to No. 99)
• Approximately 25 minutes maximum recording per
file.
Recorded Data
• Anything played on the Digital Piano is recorded.
• Individual part recording is not supported.
Recording Data Storage
Each new recording of audio data to a USB flash drive
is automatically assigned a new file name, so existing
data is not overwritten.
Recording Digital Piano Play
(Audio Recorder)
PREPARATION
• Be sure to format the USB flash drive on the Digital
Piano before using it. See “USB Flash Drive” on page
EN-35 for more information.
1.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
• When you plug in a USB flash drive, the Digital Piano
initially needs to “mount” the USB flash drive and
prepare for data exchange. Note that Digital Piano
operations are momentarily disabled while a USB
flash drive mounting sequence is being performed.
The Digital Piano’s L/R lamps flash while the
mounting process is in progress. It may take up to 10
or 20 seconds or even longer for a USB flash drive to
be mounted. Do not attempt to perform any
operation on the Digital Piano while a mounting
sequence is in progress (while L/R lamps are
flashing). A USB flash drive needs to be mounted
each time it is connected to the Digital Piano.
Off Flashing: Delete standby
Recording to a USB Flash
Drive (Audio Recorder)
PX860-ES-1A.indd 25 2014/06/27 12:26:12