Electrolux Wave-Touch 137018100 A - Manual (Page 9)

9
TEMPERATURE
EXTENDED TUMBLE
OPTIONS SCROLL & SELECT
DRYING TIME or
DRYNESS LEVEL
Operating Instructions
4. Select the appropriate cycle and
settings for each load.
Turn the cycle selector knob in either direc-
tion to select the cycle desired. The icon for
that cycle will be illuminated and if the cycle
description feature is turned on, the cycle and
estimated cycle time are displayed on the User
Interface screen for 5 seconds. Press any key
to advance the User Interface to select set-
tings and options. See the “Cycle Selection”
section in this guide for descriptions of each
cycle.
If no buttons are pressed, the User Interface
screen will automatically advance after 5 sec-
onds and display the preset drying tempera-
ture, dryness level (Auto Dry) or drying time
(Time Dry), extended tumble time, and options
for the cycle selected will be displayed. See
the “Cycle Settings Chart” in this guide for set-
tings available for each cycle.
To change the settings, press the
temp, dry-
ness level (Auto Dry) or drying time (Time Dry)
and
extended tumble buttons to scroll to the
desired settings. Press the scroll up or scroll
down buttons under
options to scroll through
the options menu. Press the select button to
add or delete options. The estimated cycle
time will be displayed at the top of the screens.
NOTE
Overdrying can cause wrinkles, shrinkage, lint,
harshness and a build up of static electricity.
Adjustments made to a cycle will be remem-
bered and recalled each time that cycle is
selected in the future.
To return to the factory default settings, select
RESET in set prefs under the options scroll
buttons.
To customize and save up to 3 cycles in non-
custom mode plus 9 more cycles for custom
users, see
save as favorite and CUSTOM
MODE in the User Interface sections of this
guide.
OPERATING YOUR DRYER, con’t
NOTE
To provide the best care of your laundry, not
every setting or option is available with every
cycle. If a setting is not available for the cycle
selected, it will not be displayed.
As the Cycle Selector knob is turned, the
cycle and estimated cycle time are displayed
on the User Interface screen for 5 seconds.
Press any key to advance the User Interface
and select settings and options.