Eiki LC-XB29N - Manual (Page 27)

27
Basic Operation
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
FREEZE button
Press the AUTO PC button on the remote control to operate
the Auto PC Adj. function. The computer screen adjustment
can be done easily by pressing this button. See page 31 for
details.
AUTO PC button
Press the D.ZOOM buttons on the remote control to enter
to the Digital zoom +/– mode. See page 37 for details.
D.ZOOM buttons
LAMP CONTROL button
Remote Control
FREEZE button
D.ZOOM
buttons
AUTO PC
button
POINT ed buttons
LAMP
CONTROL
button
Press the LAMP CONTROL button on the remote control to
select the lamp mode for changing the brightness on the
screen.
Normal ....Normal brightness
Auto ........The brightness according to the input signal
Eco ..........Lower brightness reduces the lamp power
consumption and extends the lamp life.
black out ➜ the captured image ➜ normal ➜
• • • • •
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When a projected
image is captured and set as “User” in the Logo selection
(see page 47), the screen changes each time you press the
NO SHOW button as follows.
NO SHOW button
Press the P-TIMER button on the remote control. The P-Timer
display “00:00” appears on the screen and the countdown
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
P-TIMER button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. See pages 34, 41 for
details.
IMAGE button
“No show” disappears after 4 seconds.
P-Timer display
✔
Note:
• See the previous page for the description of other
buttons.
IMAGE button
NO SHOW button
P-TIMER button