Medal Sports FH1454818 - Manual (Page 6)

1454818 PRE-INSTALLED PARTS
P1 P2
x16
P3 P4
x2
Rod Bushing Plastic Ball Entry Rim
x16 x6
Pocket
P5 P6
x2 x4
Side Pocket Cap with Plastic Screws Corner Pocket Cap with Plastic Screws
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your Multi Game. The table will be assembled upside down
and then turned over on its legs once the assembly completed. This game table is heavy, and turning it over
will require at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list page.
Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
P7
x4
1454818 PARTS LIST
www.themdsports.com 1454818
5
(Continued on the next page.)
x1
A12
Wrench
1/4 ″ T - Nut
5/16 ″ T - Nut