TA Triumph-Adler DC 2325 - Manual (Page 94)

Basic Operation
3-8 OPERATION GUIDE
Copying
Follow the steps as below for basic copying.
1 Press the Copy key when the
Copy key/indicator is off.
NOTE: If you place the original and press the Start key before the copier
has warmed up, only the scanning is performed in advance and the
copying job starts upon completion of the warm-up.
2 Place the originals on the
platen or in the optional
document processor.
NOTE: For loading instructions, refer to Loading Originals on page 2-47.
3 Check that [Auto] is selected of Paper Selection on the touch panel. Paper
that matches the size of the original will be selected automatically.
To change the paper
size, press, [Org./
Paper/Finishing],
[Paper Selection]
and select the
desired paper
source.
NOTE: Select paper size manually, if necessary, instead of using
automatic paper selection.
Status 10/10/2007 10:10
Ready to copy.
Press [OK] to display
Copies
Add Shortcut Cancel OK
Paper Selection
Auto
MP Tray
Setting
Letter
Plain
Letter
Plain
Ledger
Plain
Letter
Plain
Plain
1
Original
Zoom
Send
100%
- - -
:
:
: - - -
the image. Letter