DE DIETRICH DVH930 - Manual (Page 11)

40
EN 7 / LOADING THE REGENERATING SALT
EAU
SEL
A
B
C
Fig. 06
• Loading the regenerating salt
(Fig. 06)
Important :
Only use special dishwasher regener-
ating salt. Do not use table salt or any type
of cooking salt: this could damage your
appliance’s water softener.
Unscrew and remove the stopper on the
salt tank.
Fill the tank with regenerating salt spe-
cially designed for dishwashers.
Use the funnel supplied with your dis-
hwasher. The first time, top up with water up
to the rim of the tank.
• Regenerating salt indicator :
This illuminates when salt must be added.
After the tank has been filled with regenerat-
ing salt, the indicator light may remain lit until
the salt has dissolved sufficiently, usually after
one cycle of if the tank has not been filled
completely.
This can be deactivated as indicated in the
page 38.
Important :
If the salt overflows when filling the
tank, to avoid oxidization of the tub it is
advisable to remove the salt crystals or to
run a Soaking programme.
C
B
A