Avago Technologies MegaRAID SAS 9341-4i - Manual (Page 60)

Avago Technologies
- 60 -
MegaRAID SAS Device Driver Installation User Guide
June 2015 Solaris Driver Installation
Removing the Driver Package
# pkgrm SUNWmrsas
The following messages appear on the console:
The following package is currently installed.
mrsas Avago MegaRAID SAS 2.0 HBA driver...
Do you want to remove this package?
4. Press y to remove the mrsas package.
The following messages appear.
## Removing Installed package instance <mrsas>
Do you want to continue with the removal of this package [y,n,?,q]
5. Press y to remove the mrsas package.
6. Run the following commands to reconfigure while rebooting the machine:
# touch /reconfigure
# reboot
7. At the next bootup, enter b -r as a boot option.
8.8.3 Removing an Inbox Driver/Package on the Solaris 11 Operating System
Perform the following procedure to remove the inbox driver/package on the Solaris 11 OS.
1. Become a super-user on your system.
2. Check to see which MegaRAID driver package is installed on your system by using the following command:
— # modinfo | grep mr_sas
To find the inbox MegaRAID SAS package name, run the following commands:
— #pkg list | grep mr_sas
— driver/storage/mr_sas ----> inbox mr_sas IPS packagename
3. If the IPS package is installed, remove the package by using the following command:
# pkg uninstall driver/storage/mr_sas
4. Press y to remove the mrsas package.
5. Run the following commands to reconfigure while rebooting the machine:
# touch /reconfigure
# reboot
6. At the next bootup, enter b -r as a boot option.
8.8.4 Removing an Inbox Driver/Package on the Solaris 11 Operating System (Bootable Avago
Controller)
Perform the following procedure to remove the inbox driver/package on the Solaris 11 OS that is on a bootable
Avago controller.
1. Become a super-user on your system.