Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 20)

Other Changes in 9.5.2
16 9.5.2 Addendum to the 3ware SAS/SATA RAID Software User Guide
Figure 12. Enclosure Information page
3 To turn off any alarms that are activated to all enclosures attached to the
controller, press
F5 .
Related CLI commands
You can also turn off and mute/unmute an enclosure audio alarm using the
CLI. For details, see 3ware SAS/SATA RAID Controller CLI Guide, Version
9.5.2 In particular, see information about the following CLI commands:
• /cx/ex show alarms
• /cx/ex/almx show
• /cx/ex/almx set alarm
Other Changes in 9.5.2
The following additional changes have been made in release 9.5.2.
3DM 2 Support in OpenSolaris
When you install the LSI 3ware driver and RAID management software for
OpenSolaris, you now have the option to install 3DM 2, as well the CLI. If
you choose to install 3DM 2, you will see a few additional screens related to
3DM 2 configuration..
For more information about 3DM 2 installation and working with 3DM 2, see
the 3ware SAS/SATA RAID Software User Guide, Version 9.5.1. Please also
see the “Clarification about Installing the 3DM 2 Web Interface” on page 22
of this document.