PLANET ICA-3550V - Manual (Page 59)

5 Mega-pixel Outdoor IR PoE IP Camera
ICA-3550V
59
within 10 seconds.
Interval
For example, if you select "10 sec" here, once the motion is
detected and action is triggered, it cannot be triggered again
When the option box is ticked, only during the selected
scheduled time the I/O is enabled. That is, for example, the
Based on the
11th hour of Monday has not been colored in the scheduled
schedule
table, then no action will be triggered even the camera detects
input signal during 11:00~12:00 on Monday.
The GPIO I/O port output activates On/Off Switch, Slide Switch
GPIO Output Setting
or Pan/Tilt Module for use with relay box.
The camera triggers the external device and lasts for 10
On Off Switch seconds. You can turn off the alarm manually by clicking "off"
on the right bottom of the live video page.
The camera triggers the external device and lasts for certain of
Time Switch time according to the interval setting, and the user is not
allowed to break off the alarm manually.
Please connect to propriety relay box to reduce the risk of electric shock &
damaged.
3.8.4 Log List
Sort by System Logs, Motion Detection Logs and I/O Logs. In addition, System Logs and I/O
Logs won’t lose data due to power failure.
3.8.5 S
micro SD card before using it. Make sure t o push the micro SD card into
ely.
D card
Playback
Please insert a
the slot complet