PLANET ICA-HM830 - Manual (Page 14)

2.4 Initial Utility Installation
This chapter shows how to quick set up your IP Camera. The IP Camera is with the default
settings. However to help you find the networked IP Camera quickly the Windows utility (PLANET
IPInstaller) can search the IP Cameras in the network that shall help you to configure some basic
setting before you start advanced management and monitoring.
Please insert the bundle CD disk into your CD/DVD-ROM drive. When the welcome web page
appears, please click your IP Camera name on the IP Camera list i.e. ICA-HM830. Then click on
the utility IPInstaller to start the program.
2.5 Preparation
When you installed the camera on a LAN environment, you may execute PLANET IPInstaller to
discover camera’s IP address and set up related parameters in the camera.
2.5.1 Configure Network by PLANET IPInstaller
Please click “Search Network Device” button. PLANET IPInstaller will list all networked IP
Camera in the LAN. If the IP Camera doesn’t be found, you may check whether this IP Camera is
connect to network properly and press the search button again.
1.
Click the menu bar Tool > Search Network Device to search the device in the LAN.
2. Select IP Camera with the MAC Address corresponds to the IP Camera that is to be
configured.
14