Sony CMT-X3CD - Manual (Page 22)

22 GB
Adjusting the sound
You can select the desired sound from the
various styles and change the effectiveness
of the bass sound.
Selecting the desired sound
Press EQ
 repeatedly to select the desired
sound from the following styles:
“R AND B/HIP HOP,” “FLAT,” “ROCK,”
“POP,” “JAZZ,” “CLASSIC.”
Change the effectiveness of the
bass sound
Press MEGA BASS
.
Each press switches the feature on (“BASS
ON”) and off (“BASS OFF”).
Tip
 The factory setting is “BASS ON.”
Using the timers
The system offers Sleep Timer and Play
Timer.
Note
 The Sleep Timer has priority over the Play Timer.
At the specified time, the system is turned
off automatically.
1
Press SLEEP
 repeatedly to
select the specified time.
You can select from “SLEEP 10” (10
minutes) to “SLEEP 90” (90 minutes) in
10 minute increments, or “AUTO.” If you
select “AUTO,” the system turns off
automatically after a CD or USB device
playback ends.
Tip
 To check the remaining time of Sleep Timer,
press SLEEP  again.
 The Sleep Timer works even if the clock is not
set.
To cancel the Sleep Timer
Select “OFF” in step 1 above.
You can listen to a CD, USB device or radio at
a preset time.
Note
 Make sure you have set the clock before setting
the timer (page 9).
1
Prepare the sound source.
2
Press TIMER MENU
.
Setting the Sleep Timer
Setting the Play Timer