Yamaha Expansion Manager - Manual (Page 6)

6
Installing Pack Data on a Digital Instrument
First of all, ensure that your computer is connected to the correct network.
1.
Add the digital instrument on which you wish to install Pack content to the Install
Target list.
As described below, this can be done in two different ways—using a USB flash drive or via wireless network.
Adding using a USB flash drive
1-1.
Plug the USB flash drive into the digital instrument in question and save the corresponding Instrument Info file to
the USB flash drive.
1-2.
Plug the USB flash drive into your computer and click the Add Install Target button in the Yamaha Expansion
Manager application.
1-3.
Select Import Instrument Info from the menu displayed.
1-4.
When the file selector dialog is displayed, select the Instrument Info file that you exported from your digital
instrument.
The instrument will now be added to the Install Target list.
Adding via wireless network
1-1.
Connect your digital instrument and computer to the same wireless network or wireless access point.
1-2.
Click the Add Install Target button in the Yamaha Expansion Manager application.
1-3.
Select Search Instruments from the menu displayed.
The instrument will now be added to the Install Target list.
2.
Select the digital instrument on which you wish to install the Pack content.
Click the digital instrument added to the Install Target list in the previous step.
NOTE
Depending on the instrument to which the Pack is to be installed, the length of Waves that can be played back may be limited.
NOTE
• Details on the USB flash drives that can be used with your digital instrument can be found on the following web site.
http://download.yamaha.com
• Refer to the Owner’s Manual or Reference Manual that came with your digital instrument for instructions on how to save
its Instrument Info file.
NOTE
Refer to the Owner’s Manual or Reference Manual that came with your digital instrument for instructions on how to con-
nect it to a wireless network.