Sony ZV-1F Vlogging Camera (Black) - Manual (Page 56)

56
Note
• Always select Set after changing the connection
settings. The settings are not applied if Set is not
selected.
You can connect the camcorder to the Internet
using a modem, wired LAN, or wireless LAN.
Note
• The NETWORK upgrade license (option) is required
to use a modem and the wired LAN function.
You can connect the camcorder to the Internet via
a 3G/4G network by attaching an optional modem
to the unit.
Attaching and using more than one modem at the
same time enables high-quality streaming in
network client mode, using two lines for higher
quality streaming and device redundancy.
For details about compatible modems, contact
your Sony dealer or a Sony service representative.
Notes
• A modem cannot be used at the same time as a wired
LAN.
• A modem cannot be used when using a BP-30 battery
pack.
Modem and video output combinations
A modem cannot be used if both of Output On/
Off
(page 98) >SDI and HDMI in the Video
menu are set to On.
Both are set to On by default in Output On/Off.
To use a modem, set either of the two outputs in
Output On/Off to Off.
To use a modem and wireless LAN at the same
time, set all outputs in Output On/Off to Off.
Note
• When using a modem and video output at the same
time, the brightness of the LCD screen decreases.
Attaching a modem to the camcorder
Attach a modem to the camcorder using one of
the following methods.
Attaching to the USB 2.0 (HOST) connector or
USB 3.0 (HOST) connector
Attach a modem that supports the USB standard
of the corresponding connector. Two modems
Connecting to the
Internet
Connecting using a modem