Evo Fitness 50551 - Manual (Page 10)

assembly instructions
-10-
Step 3:
Attach the Squat Support (5) to the Side
Base (2) and Squat Base (4) using two
1/2" Washers (89) and two 1/2" Nylon
Nuts (93) for each.
Cap the Pec Dec Base (6) with one 2"
Sq End Plug (50) and one 2" Sq End
Cap (48). Attach the Pec Dec Base (6)
to the Base Frame (1) using two 1/2" x
3-1/8" Hex Head Bolts (71), six 1/2"
Washers (89) and four 1/2" Nylon Nuts
(93). Align the mounting holes in the
link plate (welded on Base Frame (1))
with the holes in the Pec Dec Base (6)
then attach with two 1/2" x 3-1/8" Hex
Head Bolts (71), four 1/2" Washers (89)
and two 1/2" Nylon Nuts (93).
Attach the Seat / Back Pad (31) to the
Pec Dec Base (6) using two 3/8" x 2-
3/4" Hex Head Bolts (79) and two 3/8"
Washers (90).
ASSEMBL
Y
LINK PLATE