Nikon AF-S NIKKOR 300mm f/2.8G ED VR II Lens - Manual (Page 28)

28
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
 The built-in flash and vignetting
To prevent vignetting, do not use the lens hood.
• For the latest information on vignetting with this lens, see the camera
manual.
Cameras
Vignetting occurs
at any shooting
distance.
F65-Series/N65-Series*, F60-Series/N60*,
F55-Series/N55-Series*, F50-Series/N50*,
F-601/N6006*, F-401x/N5005*, F-401s/N4004s*,
F-401/N4004*, Pronea 600i/6i*, Pronea S
* Sold exclusively in the USA
 Using the lens hood
Lens hoods minimise stray light and protect the lens.
Attaching the hood
• Fully tighten the lens hood screw ( 2 ).
• If the lens hood is not correctly attached,
vignetting may occur.
• To store the lens hood, attach it in the reverse
position.
 Slip-in filter holder
Always use a (52mm screw-on) filter. A 52mm Screw-on NC Filter is
attached to the filter holder when shipped from the factory.
a Press down on the slip-in filter holder knob,
and turn counterclockwise until the white line
on the knob is at a right angle to the axis of
the lens.
b Pull the slip-in filter holder from the lens body
c Detach the attached filter from the filter
holder.
d Screw a filter onto the side of the filter holder
marked with the words “Nikon” and “JAPAN”.
• The slip-in filter holder can be attached either
facing lens or camera side without having any
effect on your pictures.