Yamaha TW-E7B Noise-Canceling True Wireless In-Ear Headphones (White) - Manual (Page 22)

Connecting to a Device Already Paired
Here’s how to connect to a Bluetooth device to which this product has already been paired.
1
Activate Bluetooth on the Bluetooth device.
2
Remove the earbuds from the charging case.
The earbuds will turn on and both earbuds automatically connect to the last Bluetooth device
to which they were connected. Once connected, the indicators light up as shown below.
Purple
Lights up for 5 sec
Blue
Lights up for 10 sec
Blue
Lights up for 1 sec
Purple
Lights up for 5 sec
Blue
Lights up for 1 sec
Earbud that is now primary
If successfully connected, you will hear the “Connected” audio message in the earbud.
If the earbuds do not automatically connect to a Bluetooth device, they are waiting for a connection or are
in pairing standby mode. Make the connection to the earbuds from your Bluetooth device.
NOTE
( One of the earbuds (L or R) will be the primary earbud when connecting, according to their remaining battery power.
( If the earbuds (L) and (R) do not automatically connect, put them back into the charging case and take them out again.
(
This product does not support multi-point connectivity (connection to multiple devices at the same time).
Related links
(
“Pairing for the First Time” (p.17)
( “Pairing with a Different Device” (p.20)
( “Using only one of the earbuds” (p.44)
22
Bluetooth® Connectivity > Connecting to a Device Already Paired