MACKIE MC-60BT Noise-Canceling Wireless Over-Ear Headphones - Manual (Page 8)

MC-
50B
T • MC-
60B
T W
ireles
s Headphones with W
ide-B
and Activ
e Noise Cancelling
8
MC-50BT • MC-60BT Wireless Headphones with Wide-Band Active Noise Cancelling
MC-50BT • MC-60BT Features continued...
Previously paired and connected devices:
The Bluetooth connection will disconnect if it’s out
of range. Previously paired and connected devices will
automatically reconnect upon subsequent power-ups;
no need to re-pair devices each time! In this case,
a voice prompt will state, “power on” followed by,
“connected”.
It is possible to connect to a different device even
if the headphones had already been paired previously.
Here’s how...
Connecting to a different device:
• Step 1: Turn the power off.
• Step 2: Turn the power back on and continue
holding the button down until Jamie says,
“power on” followed by, “Bluetooth pairing on”.
If you simply power up without
holding the button down, you
will connect to the previously
paired device.
• Step 3: Pair and connect to the second device
the same way you did the first one as outlined
on the previous page.
The most common usage of something like this might
be utilizing one device connection for most of the time
– a computer, for example – but then connecting
to a phone when out taking a walk.
The Bluetooth connection may disconnect
when affected by electrostatic discharge
(ESD) or electrical fast transients (EFT).
If this occurs, manually reconnect the Bluetooth
connection.
Once the wireless headphones have been paired
with a device, this single button controls one more thing.
Press this button quickly to get a battery level
percentage. As mentioned above, pressing
and holding this button down would power
the headphones off, so don’t do that until you’re
ready. A “power off” voice prompt will confirm.
An additional feature of the MC-60BT headphones
is the ability to connect to two devices simultaneously.
The most common scenario would be connecting
to and switching between a computer and a phone.
Connecting to two devices [MC-60BT]:
• Step 1: Connect to the first device as outlined
on the previous page.
• Step 2: This may sound odd, but it’s true.
Locate this MC-60BT connection and...
select disconnect.
• Step 3: Turn on the second device and open
the Bluetooth preferences. Connect the MC-60BT
headphones to the second device.
• Step 4: When the second device has successfully
paired, return to the first device and (re)connect
the MC-60BT headphones to it.
• Step 5: This should result in great success!
If not, try the process again or reach out
to Technical Support who may be able to assist.
MC-50BT MC-60BT
1 1 4 2 2/4 3 3
5
1
2
3
5
6
4
7
4
6