XYZprinting Crazy3DPrint CZ-300 DIY 3D Printer - Manual (Page 20)

18
Info Screen
Prepare
Control
Print from SD
Change SD card
Main
Auto home
Set home offsets
Set Origin
Level Bed
Move axis
Disable steppers
Preheat PLA
Preheat ABS
Cool down
Main
Auto home
Set home offsets
Move axis
Disable steppers
Prepare
Move
10
mm
Move
1
mm
Move
0.1
mm
Prepare
Move
10
mm
Move
1
mm
Move
0.1
mm
Move axis
Move X
Move Y
PREPARE
1) Select “Prepare” and press the knob to show the functional menu.
Move axis
1) Select “Move axis” and press the knob to show the advanced setting menu.
2) Turn the knob to “Move 10mm” and press the knob to adjust print head X-Y axis movement.
3) Turn the knob to “Move X” and press the knob after setting.
Turn Clockwise “ + ” increase the value.
4) Turn the knob to “Move Y” and press the knob after setting.
Turn Anti-Clockwise “ - ” decrease the value.
For the adjustment of Z axis and extruder movement, users may turn the knob to “Move 1mm” or “Move
0.1mm” for further setting.
Move axis
Move X
Move Y Move X : + 140.0
Move axis
Move X
Move Y Move Y : + 150.0