Hikvision DS-K1T341BMWI-T Touchless Identity Authentication Terminal User Manual
Page 65
DS-K11T341BM(W)I-T Touchless Identity Authentication Terminal User Manual
UM DS-K1T341BM(W)I-T Touchless Identity Authentication Terminal 031221NA
65
device to the client.
8. (Optional): Check
Import to Group
to create a group by the device name, and import all the channels of
the device to this group.
Example:
For access control device, its access points, alarm inputs/outputs, and encoding channels (if
exist) will be imported to this group.
9. Click
Add
.
Add Multiple Detected Online Devices
For detected online devices sharing the same user name and password, you can add them to the client in a
batch.
Before You Start
Make sure the to-be-added devices are online.
1. Enter the Device Management module.
2. Click
Device
tab on the top of the right panel.
3. Click
Online Device
to show the online device area at the bottom of the page. The searched online devices
are displayed in the list.
4. Select multiple devices.
NOTE:
For the inactive device, you need to create the password for it before you can add the
device properly. For details, refer to .
5. Click
Add
to open the device adding window.
6. Enter the required information.
•
User Name
– By default, the user name is
admin
.
•
Password
– Enter the device password.
STRONG PASSWORD RECOMMENDED
−
The password strength of the device can be
automatically checked. We highly recommend that you create a strong password of your own
choosing (using a minimum of eight characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password
regularly. Especially in high security systems, resetting the password monthly or weekly can
better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end user.
7. (Optional): Check
Synchronize Time
to synchronize the device time with the PC running the client after
adding the device to the client.