Focal 100 IWSUB8 Amplifier - Manual (Page 11)

11
100 IWSUB8 ™ AMPLIFIER
U s e r m a n u a l
Connections
Pre-out
Subwoofer
A
B
Turning on the device
- Read the safety instructions.
- Connect the subwoofer cables to the output terminals
7 and tighten securely. You can connect up to two
100 IWSUB8 subwoofers in parallel.
- Connect the audio source to the RCA L / R line input when using a primary stereo amplifier (Fig A), or to
the L input only when using the LFE output of an audio-video amplifier (Fig B).
- Check the voltage selector 9 before connecting the power cable to the mains.
- Set the volume 3 to minimum, then turn on the amplifier 12 + 2 .
- Adjust the setting of the volume 3 , phase 4 and crossover 5 depending on the installation.